AT320L Universal Lathe Mill Drill 3 in 1 Combination MACHINE for Metal
Features:
- 1/2" Square drive in tailstock for use with torque wrench to precisely lock tailstock
- Easy to use lever controls
- ON/OFF reverse switch on carriage
- Ball bearing steady/follow rests
- Outboard spindle "spider" for gunsmithing or long shaft support with 4 brass-tipped screws
- Cast iron stand with extended base
- 6" 3-Jaw chuck with 2-pc. reversible jaws
- 4-Jaw chuck with reversible jaws
- 10" Faceplate
- Steady rest/follow rest with roller tips
- Full length splash guard
- Heavy-duty cast iron stand
- Halogen work light
- Quick-change tool post with included holder
- Two MT#3 dead centers (1 carbide-tipped)
- One MT#3 live center
- Set of seven change gears
- Drill chuck arbor R-8 x B16
- 5/8" Drill chuck
- Spindle sleeve R-8 x MT#3, MT#3 x MT#2
- Toolbox with service tools
| Model | AT320 |
| Max.swing diameter over bed | 320mm |
| Max.length of work piece | 750mm |
| Max.swing diameter over tool carrier | 200mm |
| Spindle bore | 38mm |
| Taper of hole in spindle morse | No.5 |
| Max.cross stroke over tool carrier | 200mm |
| Max.longitudinal stroke over small tool carrier | 100mm |
| Metric thread kinds on processing | 17 |
| Metric thread pitch on processing | 0.5-4mm |
| Inch thread kinds on processing | 20 |
| Inch thread pitch on processing | 11-40 1/n" |
| Longitudinal feed on spindle tool carrier | 0.01-1.5/r |
| Cross feed on spindle tool carrier | 0.025-0.34/r |
| Max.stroke on taper hole | 80mm |
| Taper of hole in tailstock | No.3 |
| Spindle speed step | 12 |
| Spindle speed scope | 60-1600r/min |
| Electric motor | 1.1kw |
| Drilling&Milling | |
| Max.drilling capacity | 16mm |
| Swivel-angle of headstock around the column | 360 |
| Spindle speed step | 4 |
| Spindle speed scope | 260-2620r/min |
| Taper of hole in spindle morse | No.3 or R8 |
| Electric motor | 0.37kw |
| Net weight | 400kg |
| Overall dimension | 1540*625*1750 |
