Conventional Large Lathe Heavy Duty Lathe Clearance Large Lathe

CW62125DThese lathes can perform to turn end-faces, cylindricl surfaces andinternal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining lo

Featured Products

CW62125D

Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe

These lathes can perform to turn end-faces, cylindricl surfaces and
internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining longitudinal feed of the carriage with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.
They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.
Main Specifications and Features

Main Specifications and Features
SPECIFICATION                                      Model
                    CW62125D
Max.swing diameter over bed1290mm
Max.swing diameter over carriage900mm
Max.swing diameter on gap 1750mm
Width of bed755mm
Max.length of workpiece1000mm 1500mm 2000-16000mm
Loading weight between centers6t
Spindle noseA15(1:30)
Sindle bore diameter130mm
Taper of spindle boreMetric No.140#
Range of spindle speedclockwise rotation 3.15-315r/min,  21kinds, counter-clockwise rotation 3.5-290r/min, 12kinds
Spindle front bearing inner diameter200mm
Longitudinal feeds range0.1-12r/min 56 kinds
Transversal feeds range0.05-6mm/r 56kinds
Rapid speedZ-axis3740mm/min
X-axis1870mm/min
upper toolpost935mm/min
Metrec threads range1-120mm 44kinds
Inch threads range3/8-28 TPI 31kinds
Module threads range0.5-60mm 45kinds
Pitch threads range1-56TPI 25kinds
Taper of tailstock sleeveMorse NO.80
Diameter of tailstock sleeve160mm
Travel of tailstock sleeve300mm
Main motor power22kW
Rapid motor power1.5kW
Coolant pump power0.125kW
Stand Accessories
1. four-jaw chuck F 1000mm 1set
2. steady rest F70--480mm(for more than 2m) 1set
3. follow rest (for more than 2m) 1set
4. Morse 6# centers 1set
5. center sleeve 1set
6. tools 1set
7. foundation screws 1set
Special Accessories Special order
1. steady restF 400--700mm
2. four-jaw chuck F 1250mm
3. Taper-turning device
4. Chasing dial device

5. Inch lead screw,
6. levelers
7. roller support (opened steady rest)



Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
Conventional Big Lathe Heavy Duty Lathe Gap Big Lathe
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours