Horizontal Lathe Cp6150L/Cp6250L, Universal Horizontal Gap Bed Type, Flatbed Conventional Lathe

SpecificationUnitCP6½50BCP6½66BCP6½50LCP6½66LCP6½76LSwing over bedmm500660500660760Swing over cross slidemm300430300430530Distance between centersmm1000,1500,2000,3000,4000,5000 (4000 & 5000 only for CP61 series)Swing in gapmm      -       &

Featured Products

SpecificationUnitCP6½50BCP6½66BCP6½50LCP6½66LCP6½76L
Swing over bedmm500660500660760
Swing over cross slidemm300430300430530
Distance between centersmm1000,1500,2000,3000,4000,5000 (4000 & 5000 only for CP61 series)
Swing in gapmm      -
                     710
      -
                     870
      -
                     710
      -
                     870
      -
                     970
Width of gapmm      
                     240
      
                     240
      
                     240
      
                     240
      
                     240
Width of bedmm390
Spindle nose D8
Spindle bore diametermm82105
Morse taper of spindle center M61:20
Spindle speedrpm9-1600 (24 steps)6-1120 (24 steps)
Max output torque of spindleN.m1500
Range of longitudinal feedmm/rev0.028-6.430.063-6.43 (0.0025-0.25in/rev)
Range of cross feedmm/rev0.012-2.730.027-2.73 (0.00106-0.107in/rev)
Lead screw pitch 12mm(metric system)/2 t.p.i(inch system)
Metric threadsmm0.5-224 (48 kinds) 1-224 (46 kinds)  
Inch system threadst.p.i72-1/8 (46 kinds) 28-1/8 (42 kinds)  
Module threads 0.5-112mm (42 kinds)
Diameter pitch threads 56-1/4DP (45 kinds)
Cross slide travelmm340360340360
Top slide travelmm150200150200
Section specification of tool postmm25×25
Longitudinal rapid traveling speedm/min4.5 (50Hz) / 5.4 (60Hz)
Transversal rapid traveling speedm/min1.9 (50Hz) / 2.3 (60Hz)
Morse taper of tailstock center M5
Max travel of tailstock quillmm150
Tailstock quill diametermm75
Main motorkw7.511
Rapid travel motor 250W/1360rpm
Coolant pump motor 90W/25L/min
       
Standard Accessories:  Optional Accessories   
1.Ø250mm 3-jaw chuck for 50B,50L series5.Oil gun 1.Ø630mm Face plate for 50 series7.4-position stop for saddle14.Digital readout(DRO)
  Ø325mm 3-jaw chuck for 66B,66L,76L series6.Live center 5#  Ø800mm Face plate for 66,76 series8.4-position stop for cross slide15.CE standard compliance
2.Thread chasing dial7.Center 5# 2.Ø400mm 4-jaw chuck9.Micro stop for saddle16.Chuck cover 
3.Chip guard for L2m lathe8.Center sleeve3.Ø20-140mm Small steady rest10.Quick change tool post  
   Follow Chipe guard for L3m lathe  4.Ø130-260mm Large steady rest11. Damping washer  
4.Footbrake  5.Ø20-80mm Follow rest12.Taper turning attachment(TTA) 
   6.Ø250mm Drive plate13.Halogen work lamp  
       
Hercules Machinery Equipment Ltd.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours