Manual Lathe Ordinary Horizontal Lathe (CA6140/CA6240)

 Manual turning machine common horizontal lathe (CA6140/CA6240) Product ApplicationThe machine is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. This machine is widely used i

Featured Products

 Manual turning machine common horizontal lathe (CA6140/CA6240)

 Product Application

The machine is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. This machine is widely used in sanitary, valve, electrical appliance, instrument, automobile, motorcycle, bearings and so on.
Manual Turning Machine Common Horizontal Lathe (CA6140/CA6240)
The main specification : 

Max .Swing over bed400mm400mm
Max .Swing over carriage210mm210mm
Max .Swing in gap--630mm
Effective gap length--210mm
Max .length of work piece750/1000/1500/2000/2200/3000mm
Width of bed400
Section of turning tool25x25mm
Spindle speed10-1400rpm/16-1400rpm(24steps)
Hole through spindle52mm ,(B: 80mm)
Spindle taper(MT6)(Φ90 1:20)[Φ113:20]
No. of feed(64 kinds)(for each)
Range of metric threads(1-192mm) (44 kinds)
Range of inch threads(1-24tpi) (21kinds)
Range of module threads0.25-48 (module 39 kinds)
Range of diametral pitc threads1-96DP (37 kinds)
TailstockMax. tailstock spindle travel150mm
Tailstock spindle diameter75mm
Taper of tailstock spindle center hole(MT5)
Main motor7.5KW(10HP)
Packing dimensions

(L×W×H mm)

Packing size for 750mm2440×1140×1750mm
Packing size for 1000mm2550×1140×1750mm
Packing size for 1500mm3150×1140×1750mm
Packing size for 2000mm3650×1140×1750mm
Packing size for 2200mm4030×1140×1750mm
Packing size for 3000mm4800×1140×1750mm
G.W. / N.W. (kg)G.W. / N.W. for 750mm2100 /1990kgs
G.W. / N.W. for 1000mm2190 /2070kgs
G.W. / N.W. for 1500mm2350 /2220kgs
G.W. / N.W. for 2000mm2720 /2570kgs
G.W. / N.W. for 2200mm2800 /2600kgs
G.W. / N.W. for 3000mm3300 /3200kgs


Standard Accessories:                                                  Optional Accessories:

1. Centers;                                                                            1. Quick change toolpost 
2. Steady rest (750mm without this);                                     2. 2-axis Digital readout
3. Follow rest (750mm without this);                                      3. 4-jaw chuck 
4. Foot plate;                                                                         4. Grinding head
5. Face plate (CA6140 without this);                                      5. Tamping attachment 
6. 3-jaw chuck;
7. Leading screw guard; (3000mm without this)
8. Toolpost protection;
9. Chuck protection;
10. Cooling system;
11. Work Lamp.
12. Back guard

Manual Turning Machine Common Horizontal Lathe (CA6140/CA6240)
The main performance characteristics:
1  Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2  Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the abradability and stability of the machine.
3  The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4  Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5  Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6  The machine adopts high strength four station turret shank size: 25x25mm.

1  CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2  The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3  Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4  The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5  Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.

Product Details
Manual Turning Machine Common Horizontal Lathe (CA6140/CA6240)

Packing shipping
For machine: usually by sea;  
For documents: by international express, eg. DHL,TNT or EMS.
For packing :Free fumigation plywood packaging steel base
our service
1. Technical support online service provided.
2. Technical files service provided.
3. Machine operation video provided
4. On-site training service provided.
5.Spare parts replacement and repair service provided.
6 All of the questions will be replied within 8 hours
7. If you need to develop products with your own specification, we can    help you to work it  out.
8. Always be honest, never lie to customer, and never declare anything     we don't have
Company Information
Since 1996,20 years' history for machine tool manufacturing
10 years' history for export
Total 2 manufacturing bases in china
Sino-germany technology cooperation
Production of 8 categories, more than 130 kinds of products
Set up design&research center at TAIWAN 
Exported to total 48 countries in the world covered most areas
One-stop shopping for nearly all other types' machine tools
Manual Turning Machine Common Horizontal Lathe (CA6140/CA6240)
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .

3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.

4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.

5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
6: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set ) 

We want to know:
1.What's your Industrial Voltage? 
2.We strongly suggest you to tell us size, material of your workpiece for our evaluation, if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!     
3.If need CIF Price, please kindly tell us the port of destination.


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours